Polyaluminum chloride is a kind of inorganic polymer flocculant with multi hydroxyl and multi complex. In water treatment, it can purify water through a series of physical and chemical reactions such as coagulation, adsorption and precipitation.

Take rubber factory wastewater as an example. Rubber factory wastewater is generally colorless, but relatively turbid with odor. There are many suspended particles on the surface of the wastewater, containing certain heavy metal ions. The pH is usually about 6, which is one of the more difficult wastewater to treat.

Before using polyaluminum chloride to treat wastewater from rubber factory, take a certain amount of wastewater and add polyaluminum chloride aqueous solution of corresponding concentration in the laboratory. After stirring fully and reacting for a period of time, precipitation begins to appear obviously, and the solution gradually becomes clear. After one day's storage, the solution basically appears colorless and transparent, Therefore, it can be concluded that polyaluminum chloride has a good effect in the treatment of rubber factory wastewater.

The wastewater from rubber factory treated by polyaluminum chloride can meet the relevant discharge standard. Moreover, polyaluminum chloride has the advantages of low cost, small consumption, simple operation and obvious treatment effect compared with other water purification products.

As a professional manufacturer of polyaluminum chloride, welcome to consult and purchase polyaluminum chloride products at any time.